Camilleri Marine - Products

Anchor Winches>Quick Nautical Equipment>Battery Chargers

Our Company

SBC ADV PLUS - Medium Power Series

Ellcee Nautical Supplies Co.Ltd.
Camilleri Marine

162A Ta'Xbiex Seafront
Gzira - Malta.
Website:www.ellcee.com

Tel: (+356) 21 346 320
Fax: (+356) 21 345 414
Mob: (+356) 9943 9954
E-mail:camarine@ellcee.com

Contact: Lawrence Camilleri
(Managing Director )

300 FR - 500 FR

Important advantages:

•	Multiple outputs in order to charge more groups of batteries (internal battery isolator diodes)

•	Differentiated charging for liquid electrolite or gel batteries

•	Integrated fuses inside the battery chargers (one for each output)

•	Ability of providing full output power with low supply voltage

•	The possibility of using the battery charger as a power supply without batteries

•	Low residual fluctuation on output (ripple lower than 30 mV RMS)

•	Power factor (cos ) equal to 1

•	Compatible with every kind of generator

•	Can work in a wide range of ambient temperatures

•	Variable speed for the cooling fan

•	NEW High-technology control panel

•	Automatic and manual half power mode

•	NEW CAN-BUS interface for data transfert

•	NEW Case constructed in stainless steel and Cycoloy®

700 FR - 650 FR

3 Step automatic charge

BULK phase (constant current)
ABSORPTION phase (constant voltage)
FLOAT phase (maintenance)

Universal AC Network: models DR

Protections:
• Reverse polarity (with internal fuse)
• Overload
• Output short circuit
• Overheating

Model	SBC ADV PLUS 300 FR	SBC ADV PLUS 500 FR
Max output current (1)	30 A	40 A
Charge absorption voltage	14,1 Vdc (14,4 Vdc gel)
Charge float voltage	13,5 Vdc (13,8 Vdc gel)
Residual ripple (2)	30mV RMS max
Charging characteristics	Automatic in three stages IUoU
Number of output (3)	3
Supply voltage	280 ÷ 83 Vac with power reduction over 97 Vac
Frequency	45 ÷ 66 Hz
Max absorption (230 Vac) (4)	2,5 A	3,3 A
Max absorption (115 Vac) (4)	5,1 A	6,8 A
Power factor (cos )	1
Operating temperature	-20 ÷ +70 Cº, with power reduction over +50 Cº
Cooling	Natural	Forced, with controlled fan
Case material	Stainless steel - Cycoloy®
Dimensions (W x H x D)	272 x 334 x 127 mm
Weight	4,2 Kg
Safety classification	EN 60335-2-29
EMC Class	EN 55022/B

Maximum value at normal use or in short circuit.
At maximum output current on resistive load.
Each output can supply the maximum value of nominal current. The sum of the currents supplied from each output can not exceed the maximum nominal value of the equipment.
With supply voltage specified as and output current equal to the maximum nominal value.

Model	SBC ADV PLUS 700 FR	SBC ADV PLUS 650 FR
Max output current (1)	60 A	30 A
Charge absorption voltage	14,1 Vdc (14,4 Vdc gel)	28,2 Vdc (28,8 Vdc gel)
Charge float voltage	13,5 Vdc (13,8 Vdc gel)	27 Vdc (27,6 Vdc gel)
Residual ripple (2)	30mV RMS max
Charging characteristics	Automatic in three stages IUoU
Number of output (3)	3
Supply voltage	280 ÷ 83 Vac with power reduction over 97 Vac
Frequency	45 ÷ 66 Hz
Max absorption (230 Vac) (4)	4,8 A	4,5 A
Max absorption (115 Vac) (4)	9,8 A	9,5 A
Power factor (cos )	1
Operating temperature	-20 ÷ +70 Cº, with power reduction over +50 Cº
Cooling	Forced, with controlled fans
Case material	Stainless steel - Cycoloy®
Dimensions (W x H x D)	272 x 412 x 127 mm
Weight	5,4 Kg
Safety classification	EN 60335-2-29
EMC Class	EN 55022/A

Maximum value at normal use or in short circuit.
At maximum output current on resistive load.
Each output can supply the maximum value of nominal current. The sum of the currents supplied from each output can not exceed the maximum nominal value of the equipment.
With supply voltage specified as and output current equal to the maximum nominal value.