|
|
Brush Thinner |
|
|
Brush Thinner for Paint and Varnish Pure distilled white spirit for thinning all Epifanes one-part paints and varnishes. |
Spray Thinner |
|
|
Spray Thinner for Paint and Varnish - A fast evaporating solvent for spray applications of all Epifanes one-part paits and varnishes. Fast evaporating feature helps minimize risk of sags and runs. |
|
|
Ellcee Nautical Supplies Co.Ltd.
Camilleri Marine
162A Ta'Xbiex Seafront
Gzira - Malta
Tel: (+356) 21 346 320
Fax: (+356) 21 345 414
Mob: (+356) 9943 9954
E-mail: camarine@ellcee.com
Contact: Lawrence Camilleri
(Managing Director) |
 |
|
|
|
Accelerator |
|
|
Accelerator for paint and Varnish - a quick drying resin-based additive to be used in one-component semi-synthetic paints and varished. The addition of 5-7% by volume will hasten the curing process without negatively affecting gloss or flow. For interior use a greater amount by volume may be used to enhance the abrasion resistance but it will reduce the flexibility of the finish. Not for use with Epifanes Monourethane or Nauiforte paints. |
Easy-Flow |
|
|
Designed primarily as a flow enhancer, Easy-Flow may also be used as a Wood sealer or rust inhibitor. Easy-Flow, based on a selection of natural oils, may be added at a rate of 5-10% by volume to all conventional single-part and half-synthetic pains and varnishes to improve the flowing characteristics in conditions that are less than ideal. Easy-Flow will extend the wet-edge time and reduce the possibility of lap or brush marks.
Easy-Flow may be applied full-strength to bare wood as an impregnating wood sealer. Additionally, it may be substituted for thinner at up to 25% volume in wood primer to improve adhesion and protection.
Easy-Flwo will inhibit rust when applied to ferrous metals. It has the ability to penetrate thin layers of rust and makes an excellent base for subsequent coatings of rust preventing systems such as Werdol Metalprimer. |
Fiberglass Prep Cleaner |
|
 |
A cleaning adn de-waxing agent for fiberglass and gelcoat surfaces. Fiberglass Prep Cleaner should be used prior to sanding to remove any traces of wax, oils, grease, or dirt. Fiberglass Prep Cleaner may also to be used for a final wipedown just prior to application of primers or topcoats.
|
Non-skid Beads |
|
 |
Epifanes non-skid polypropylene beads are used to provide a texture to high gloss surfaces to help eliminate the risk of slipping. Although best used in two-component or monourethane paints they may also be added to Epifanes varnish for applications such a stair treads or cockpit seats where secure footing is required. The palypropylene beads will absorb the paint or varnish thereby ensuring a uniform color appearance of the coated surface over time. |
|
|
